Have Questions? 918-336-4282
You have no items in your shopping cart.
51 Back Pressure Check Valve
51 Back Pressure Check Valve
51 Back Pressure Check Valve Cross Section
Picture of Model 51

MGM Model 51 Series Threaded Back Pressure Check Valves

Features:

  • Designed with male and female NPT threaded connections.
  • Available in 1/2" to 3" NPT threads.
  • Generous flow channels provide low pressure drops.
  • Heavy duty steel construction will withstand temperatures from -50° F (-45° C) to +300° F (+148° C) and internal pressures up to 1900 psig (131 barg).
  • Complete 304 or 316 stainless steel construction available for use in corrosive or extreme environments.
  • UNDERWRITERS LABORATORIES INC. listed for propane, butane, and anhydrous ammonia.
  • CRN # OC13500.5C
  • Other valve sizes may be available. Contact MGM for alternate sizes.

Canadian Registration Number: OC13500.5C
Series Pipe Size Cv Factor A B D E F HEX Flow Rating
51:FFD 1" x 1" x 0.5" 6.7 3.0 2.63 1 1 .5 1.38 Click Here
51:GGE 1.25" x 1.25" x 0.75" 10 3.25 2.81 1.25 1.25 .75 1.75 Click Here
51:HHE 1.5" x 1.5" x 0.75" 10 3.44 3.0 1.5 1.5 .75 2.0 Click Here
51:HHF 1.5" x 1.5" x 1" 16 3.5 3.0 1.5 1.5 1 2.0 Click Here
51:IIF 2" x 2" x 1" 16 3.75 3.25 2 2 1 2.5 Click Here
51:IIG 2" x 2" x 1.25" 24 3.88 3.25 2 2 1.25 2.5 Click Here
51:KKI 3" x 3" x 2" 60 5.0 4.38 3 3 2 3.5 Click Here
All Size Values are in Inches.
Carbon Steel 316 Stainless
Body Low-temp Carbon 316-SS
Guide Low-temp Carbon 316-SS
Spring --- 316-SS or 302-SS ---
Poppet(incl. nut and cotter pin) --- 316-SS ---

MGM Model 51 Back Pressure Check Valves are designed to allow flow in one direction only. The check mechanism is held in the closed position by a spring, which stops flow in the reverse direction. When pressure from flow in the permitted direction overcomes the force of the spring, the check mechanism opens. When flow stops or reverses, the check closes. The metal-to- metal seating allows slight leakage after closure. The valves are recommended for use in inflowing lines.

Model 51 Back Pressure Check Valves are designed for installation in lines that flow into pressure tanks. This valve should be used in inflowing lines when outward flow is never required. Model 50 Back Pressure Check Valves are machined from solid bar stock.

Model 51 Back Pressure Check Valves can be mounted in any orientation. Each valve will have the proper flow direction indicated by an arrow stenciled into the body. As with all MGM Back Pressure Check Valves, do not reduce outlet pipe size. Back Pressure Check Valves should be installed as close as possible to the container, with the poppet stem pointed inwardly toward the container.